 |
 |
 |
 |
The Design LED 36 Tri-Brick (DLED 36 Tri-Brick)by Elation Professional is a high output, compact (fits in 12” box truss), LED color changer featuring seamless RGB color mixing using 12 x “Tri-color” 3W LEDs, 36 Watts total - 12 Red, 12 Blue and 12 Green. This unit is convection cooled and provides up to 50,000 hours estimated LED life. The DLED 36 Tri-Brick is rated at IP 20, designed for indoor applications only and is fully operational in any mounting position. The unit can be operate from 90-240V and is ac linkable with IEC in/out connectors. Control data input is via 3 pin or 5 pin DMX data first in and out connector cables. The DLED 36 Tri-Brick also features low power consumption, minimal heat emission, no tri-color shadows and flicker-free operation for television and film. The DLED 36 Tri-Brick includes a dual yoke mounting bracket for fixed installation or can be used as a split bracket for floor standing and separated for mounting multiple units together in a line for linear strip design. The unit also features an on board 4 button control menu with 4 digit LED display for setting control address, modes, manual or auto programs. The unit comes fitted standard with a 25° lens kit which produces a 47° field angle effect. Optional wide and narrow lens kits are available.



|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 12 x "Tri-Color" 3W LEDs - (Uses 3-in-1 TRI LED system for superior color mixing - No three color shadows)
- Seamless RGB color mixing
- Infinite Color possibilities
- Compact Design
- 38.5º Beam Angle
- 2720 LUX @ 1 meter
- 350 LUX @ 3 meters
- Long Life L.E.D. (rated at 100,000 Hours)
- Built-in Power Supply and DMX 512 Control
- USITT-DMX 512
- 3, 4, 12 OR 15CH operation modes
- 4 Button Electronic Menu
- 3 & 5 pin XLR in/out
- IEC Power in/out
- Master/ Slave auto program and music trigger
- 8 built-in programs with Speed control
- Strobe effect (1-18 flashed per second)
- Control each L.E.D. independently
- 0-100% Dimming
- Multi-voltage: 100-240V AC, 50/60Hz
- On/Off Power switch
- Fan cooled
- Mounting bracket and safety eye-hook installed
- (LxWxH): 16.3” x 9” x 3.15” / 415 x 230 x 80mm
- 9.5 lbs. / 4.3 kgs.
- cETLus Approved
|
|
 |
 |
 |
 |
|
 |

| Accessories for this product... |
|
|
|

|